How To Use MR SMOKE CE4 KIT

How to use the MR SMOKE CE4 VAPE KIT and how to fill the CE4 Tank

The Next step in your Vaping Journey, this E Cig will provide a simplified convenient easy to use vaping experience,

1. Step A: Take out the e-liquid bottle lid;

          Step B: Unscrew the inhaler tip from the CE4 cartomizer

 .

            Step C: . Using an e-liquid bottle or syringe, fill the CE4 Tank by inserting e-liquid down the side wall. Try to avoid the Tank in the middle.

            Step D: Screw the inhaler tip back onto the CE4 Tank and make sure the rubber band stays on the mouthpiece to prevent leakage.

2.  Screw the CE4 Tank onto the MR SMOKE BATTERY:

* The ce4 e-cigarette works only when you press the LED button. Press the LED button and inhale at the same time.

To switch on or off the battery just press the button 5 times rapidly.

3.  Recharge!

Screw the battery onto the USB charger you have received within the kit and insert the USB end into a computer or a USB wall plug.

leave the battery on the charger for 12 hours for the first time. After it will charge within 2-3 hours. The red light on the USB charger will change to green when the eGo battery is fully charged.